home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
FishMarket 1.0
/
FishMarket v1.0.iso
/
fishies
/
201-225
/
disk_202
/
vlt
/
s
/
ovlt.init
< prev
next >
Wrap
Text File
|
1992-05-06
|
7KB
|
220 lines
## vlt.init
#
# This is a sample initialization file. The settings listed here override
# the program's defaults and also the ones read from vtprefs.dat. These files
# may be located in the current directory and/or in s:. Default directory is
# searched first.
#
# This file is called ovlt.init rather than vlt.init, because with the
# supplied vtprefs.dat file you might not want to have a vlt.init file...
#
# Hash mark at the beginning of a line denotes a comment.
# White space (space(s) or tab(s)) delimit fields.
# Case ignored except for function key bindings.
#
# While based on Dave Wecker's VT100, many things have changed, many
# things were added. Have fun...
#
# Willy.
#
##
#
APPCUR ON # Application keypad mode is being used
BACKGROUND 000 # Colors are in hex RGB from 000 to FFF
BAUD 2400 # Anything after required fields is ignored
BOLD 950 # Color for bold highlighting (in custom)
BREAK 75000 # Break time in micro-seconds
BTAB_SHIFT NO # Set SHIFT TAB to send ESC TAB. Else just TAB.
BUFFER 2048 # 512 <= Input buffer size <= 2048
COL4 D00 # The RGB setting of color 4
COL5 D90 # The RGB setting of color 5 (color mode bold)
COL6 045 # The RGB setting of color 6
COL7 999 # The RGB setting of color 7 (color mode cursor)
CURSOR 080 # Color for cursor (in custom screen)
DOWNCASE YES # KERMIT should downcase host names
DEPTH 3 # number of bit planes to use (1 or 2 or 3)
ECHO ON # Full duplex mode in use
FOREGROUND 078 # Colors are only used on the custom screen
HANDSHAKE X # N=none, X=Xon/Xoff, 7=7wire, w=7/XonXoff
HEIGHT_CURSOR 1 # Cursor height
INTERLACE ON # ON for CUSTOM or interlaced workbench
KERMIT_FL S # Kermit flags, H = host is server
KEYSCRIPT 7E # Hex value for script introducer
KMAXPACK 1000 # Maximum Kermit packet length
LFHELP_KEY NO # Set HELP key to send LF, else send keypad ','
LINES 35 # normal <= 24 interlaced <= 48
LOCK_GRAPHICS NO # Disable Tektronix graphics
MODE IMAGE # IMAGE or CRLF (for KERMIT transfers)
MOUSE OFF # Mouse events to host on or off
NUMKEY ON # The keypad should be numeric
PARITY EVEN # NONE (= 8 bit), MARK, SPACE, ODD or EVEN
PRESCROLL 8 # Max. number of lines of prescroll
RENDER Q # Render mode: Quick, Normal or Color
SCREEN CUSTOM # may be CUSTOM or WORKBENCH
SWAP OFF # Don't Swap the Back-space and Delete keys
TEK_LOAD NO # Load Tektronix screen and preferences.
VOLUME 0 # Beep Volume (0 = Visual Beep)
VPF_KEYS ON # PF keys on the screen off or on
WBCOLORS NO # ignore custom colors and use defaults
WIDTH 100 # Number of columns
WRAP OFF # Auto wrap ON or OFF
XFER_PROTOCOL X # Transfer protocol: Ascii, Kermit, XMODEM
XMODEM_FL C1 # XMODEM flags. C is CRC, 1 is 1K blocks
#
# Function bindings (strings to type when any of F1 - F10 are pressed)
#
# f <num> = function key
# f <num>+10 = shifted function key
# f <num>+20 = ctrl-ed function key
# f <num>+30 = alt-ed function key
# f <num>+40 = menu items right-Amiga 1 - 0
# f <num>+50 = screen pf gadgets
#
# Strings are parsed at the time the corresponsing function key is
# activated. Unlike previous versions of the program, this version uses
# standard AmigaDOS (ARP) escape conventions. This means that the byte stored
# in ArpBase.ESCChar is used to detect the escape values. This defaults
# to the undocumented BCPL '*' character, but the Set command provides users
# with a method for changing this default.
#
# Currently the following special characters are recognized:
# N - newline
# T - horizontal tab
# V - vertical tab
# B - backspace
# R - return
# F - formfeed
# E - escape (ascii 27 decimal)
# Xnn - character representd by hex value nn.
#
# The above may be either upper or lower case. If an escaped character which
# is not one of the above, it will return the character value (i.e. '*A' will
# be replaced by the single character 'A'. The sequence '**' is replaced by
# the single character '*', and so on.)
#
# For sending hexcodes, the *X argument may be followed by either one or
# two hex digits, in either upper or lower case.
#
# If the first character of the string is a script introducer (KEYSCRIPT)
# then the string is interpreted as a script item.
# If the next character is a @, the following string will be considered the
# name of a script file. If the file extension is .vlt or .rexx, the script
# name will be sent to the REXX host when the key is pressed. If the extension
# is .scp, the lines in the corresponding file will be executed as VLT script
# commands. Othereise, the string following the script introducer will be
# imterpreted as a VLT command.
#
# Examples of bindings:
#
# F 10 "*EOP"
#
# means send <escape> O P to host upon pressing F10.
#
# F 11 "~emit 'This is a test'"
#
# means send "This is a test" to the VLT screen upon pressing shift-F1.
#
# F 22 "~rx 'send this to rexx'"
#
# means send "send this to rexx" to the REXX host as a string command upon
# pressing ctrl-F2
#
# F 32 "~@dialbix.scp"
#
# means execute the VLT script "dialbix.scp" upon pressing alt-F2.
#
# F 44 "~@dialwork.rexx"
#
# means send "dialwork.rexx" to the REXX host as a command upon pressing
# right-Amiga 4.
#
# F 55 "~send '*EOP'"
#
# means send <escpae> O P to the host upon clicking the F5 gadget on the
# screen. This is equivalent to example F 10.
#
f 1 "*EOP"
f 2 "*EOQ"
f 3 "*EOR"
f 4 "*EOS"
f 5 "f5"
f 6 "f6"
f 7 "f7"
f 8 "f8"
f 9 "f9"
f 10 "f10"
f 11 "F1"
f 12 "F2"
f 13 "F3"
f 14 "F4"
f 15 "F5"
f 16 "F6"
f 17 "F7"
f 18 "F8"
f 19 "F9"
f 20 "c10"
f 21 "c1"
f 22 "c2"
f 23 "c3"
f 24 "c4"
f 25 "c5"
f 26 "c6"
f 27 "c7"
f 28 "c8"
f 29 "c9"
f 30 "c10"
f 31 "a1"
f 32 "a2"
f 33 "a3"
f 34 "a4"
f 35 "a5"
f 36 "a6"
f 37 "a7"
f 38 "a8"
f 39 "a9"
f 40 "a10"
f 41 "m1"
f 42 "m2"
f 43 "m3"
f 44 "m4"
f 45 "m5"
f 46 "m6"
f 47 "m7"
f 48 "m8"
f 49 "m9"
f 50 "m10"
f 51 "*EOP"
f 52 "*EOQ"
f 53 "*EOR"
f 54 "*EOw"
f 55 "*EOx"
f 56 "*EOy"
f 57 "*EOt"
f 58 "*EOu"
f 59 "*EOv"
f 60 "*EOq"
f 61 "*EOr"
f 62 "*EOs"
f 63 "*E!"
f 64 "*E@"
f 65 "*E#"
f 66 "*E$"
f 67 "*E%"
f 68 "*E^"
f 69 "*E&"
f 70 "*E**"
f 71 "*E("
f 72 "*E)"
f 73 "*E_"
f 74 "*E+"
f 75 "*EOS"
f 76 "*E*X7F"
f 77 "*EOn"
f 78 "*EOl"
f 79 "*R"
f 80 "*EOM"
#
# all done with init, now execute script as startup sequence
#
#exit df1:vt100_source/dialwork.script